Temptech COPENHAGEN CPRO1800SRB, User Manual

Page: 22 / 54

.19.
≥
1835mm
( 72 ¼” )
≥
695mm
(27 ¼
”)
1835mm
( 72 ¼” )
655mm
(25 ¾”)
≥
730mm
(28
¾”)
680mm
26 ¾
”
ACCESSORY INSTALLATION BEFORE OPERATING
„
UNPACKING AND CLEANING THE WINE COOLER
•
Remove the exterior and interior packing materials.
•
Let the appliance stand upright for approximately
24 hours
before connecting
it to the power source, which helps to reduce the possibility of a cooling-system
malfunction from handling during transportation.
•
Use a soft cloth to clean the interior surface with lukewarm water.
For all models except OZ45SB, OZ45SW, OZ45SX, OZ45SBTOP,
OZ60SB, OZ60DB, OZ60DX, OZ60DW, OZ90DB, OZ90DX, OZ90DW,
OZ124SB, OZ124DB
I MPORTANT: The front louver at the base of the appliance is for ventilation. Nothing
should be placed in front of this front louver; otherwise your Wine Cooler may not
operate properly.
o A decorative plinth can be fitted to the front of the base vent, a cut-out
should be made in the plinth with bigger size than the front louver. The
cut out is required whether the front louver is removed or not.
„
Adjusting the height and levelling off your wine cabinet
For all models except OZ45SB, OZ45SW, OZ45SX, OZ45SBTOP,
OZ60SB, OZ60DB, OZ60DX, OZ60DW, OZ90DB, OZ90DX, OZ90DW,