manualshive.com logo in svg

Temptech COPENHAGEN CPRO1800SRB, User Manual

Share
Download
Temptech COPENHAGEN CPRO1800SRB User Manual Download Page 52

.49.

INSTRUCTION MANUAL

1. Locate the plinth (packaged inside the appliance)
2. Remove the four screws from (two on each side of) the plinth section, but take care 

to support both sections to prevent the adjustable section from falling away. Remove 
the adjustable front section and place this somewhere safe.

3. With the help of another individual, make sure the wine cooler is secure and tilt it 

backwards to gain full access to the area below the door. Make  sure that the door is 
kept closed at all times during this process in order to avoid damage to the door and 
appliance.

4. If present, remove the two screws shown by arrows and marked as 'A:.  in Fig. 14. 

Then, locate the four black fitting screws. These are packaged  inside the appliance 
with the door reversing hinge.

5.   If present, remove the screws shown by arrows and marked as 'B' in Fig. 15. These 

are not needed.

6.  Offer up the plinth, ensuring it is the same way up as per Fig. 16. Then, using a 

(magnetic tipped) screwdriver, insert two of the black fitting screws through the oval 
access holes (shown in Fig. 16) and tighten them.

7.  Install a (black fitting) screw into each of the two lower holes (shown in Fig. 16). This 

will help to secure the plinth to the underside of the wine cooler. (Steps continued on 
page 21)

8.  Adjust the wine cooler feet so that you achieve the desired height for the cooler. 

If needed, re-attach the extendable plinth section with the four screws that were 
removed in step 2. Stand the wine cooler up steadily- if the extendable section will 
foul the floor or similar, remove it. Allow the wine cooler to stand for 24 hours before 
plugging it in. This will help to prevent damage to the system.

INSTALL REMOVABLE FRONT GRILLE                               

Included models OX15SRB, OX30DRB, OX30DRW, OX30DX, OX60DRB, OX60DRW, 

OX60DX

Follow these steps to do so:

The plinth/grille for this appliance comes packaged inside and can be fitted if desired 

Summary of Contents for COPENHAGEN CPRO1800SRB























































Reviews:

No comments

Brands by name

Popular brands

Load more brands