9
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP 2
Open
HARDWARE BAG 2
.
Slide the right
CONSOLE MAST
down on to the
CONSOLE MAST
SUPPORT TUBE
. Bolt in place
using 2
BOLTS (A)
, 2
LOCK
WASHERS (B)
, and 2
WASHERS
(C)
on the side
.
Then, bolt in
place using
2
BOLTS (A)
, 2
LOCK
WASHERS (B)
, and 2
WASHERS
(C)
on the front
.
Note: Carefully lift right
CONSOLE
MAST
to avoid disconnecting
CONSOLE WIRE
from the motor
control board. The
CONSOLE
WIRE
must be threaded through
the
MAST
.
Repeat on the other side.
Attach
DECK LOCK LATCH
to
LEFT CONSOLE MAST
using
2
BOLTS (D).
A
B
C
D
BOLT (A)
15 mm
Qty: 8
LOCK WASHER (B)
Qty: 8
WASHER (C)
Qty: 8
BOLT (D)
20 mm
Qty: 2
HARDWARE BAG 2 CONTENTS :
* NOTE:
Be careful not to pinch any wires
while assembling the masts.
BOLT (D)
DECK LOCK LATCH
LEFT CONSOLE MAST
BOLT (A)
WASHER (C)
LOCK WASHER (B)
LOCK WASHER (B)
WASHER (C)
RIGHT CONSOLE MAST
CONSOLE MAST SUPPORT TUBE
CONSOLE CABLE
(THREAD THROUGH INSIDE HOLE IN MAST)
BOLT (A)
