Tempish BOSS Dirt, Instructions Manual

Page: 50 / 52

UK
CHECK BEFORE RIDING
First of all, please make sure the brakes function properly.
Secondly, check whether the handlebar is secured properly and tightly.
Thirdly, check the wheels are secure but still able to roll without resistance.
Finally, you can start riding the scooter after checking the above points and safety notices.
USER GUIDE AND MAINTENANCE
• Please, rotate the bearings and wheels to see whether they are workable, and do some adjustments or add lubricant if it´s needed after the first 2 week´s use.
• In general, it is suggested to disassemble and clean the scooter every 6 months, and add lubricant on moving parts. Please make sure the parts specifications are correct with the dealers
if some parts need to be replaced.
• If the front fork and wheel are not fixed tightly, you can use a wrench to tighten the locking nut properly. Use firm pressure but avoid over tightening.
• The PU wheels may be worn out after some time of use, please contact the seller to replace new PU wheels for a safe ride.
• The wheels and wheel bearings may become worn out after regular use and can be changed easily. Remove the axle bolts with two allen keys and slide the wheel off its fork. Replace
new wheel or wheel bearings, screw in the bolt through aligned fork and wheel, and then tighten the bolts with two allen keys on each side of the wheels. Acquire the correct wheels or
wheel bearings from the local dealer of this scooter.
• Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaner or solvents as they may damage the surface. Do not use alcohol, alcohol based or ammonia- based cleaner
as they may damage or dissolve some components or soften the decal adhesive.
• Make sure all components are assembled and secured sturdily before each use.
• Self-locking nuts and other self-locking fixings may lose their effectiveness over time. If any of these components are no longer functioning how they should it is strongly recommended
that you discontinue use of the product and seek replacement parts from the dealer or importer of this product.