LIZA Enclosure User Manual
page 4
2 Installation
2.1 Safety and Warnings
These warnings are for your protection. Failure to comply may result in serious injury or death.
Tempest Lighting, Inc. assumes no responsibility for damages or injury incurred by misuse or
mishandling of product.
Do not
attempt to install or operate the enclosure before fully reading and understanding this
manual
Never
allow anyone who has not read this manual to open the enclosure or perform
maintenance on the equipment within.
Never
leave the enclosure unattended when open.
Always
make sure all bolts and latches are tight and safety locks are in place after performing
any form of maintenance on the unit.
Do not
open any electrical boxes until power has been shut off to all supply lines to the
enclosure (including the one powering the equipment).
Do not
open any outdoor enclosure in wet weather.
2.2
Tools and Equipment
To install the enclosure, you will need the following items:
Crescent wrench
Phillips screwdriver
Terminal screwdriver
Proper wiring installation equipment (for line power and signal wiring)
Any equipment listed in the equipment manufacturer’s equipment-specific installation
directions
