background image

 

 

LIZA Enclosure User Manual 

 

page 17 

7  Limited Warranty  

INSPECTION/WARRANTY/RETURNS. 

A. Customer, at its sole expense, shall inspect all Goods promptly upon receipt and accept all Goods that conform 
to the specifications or catalog. All claims for any alleged defect in or failure of the Goods or Seller's performance to 
conform to the Contract, capable of discovery upon reasonable inspection, must be set forth in a written rejection 
notice detailing the alleged non-conformity, and be received by Seller within thirty (30) calendar days of Customer's 
receipt of the Goods. Failure by Customer to notify Seller of the alleged non-conformity within thirty (30) days will 
be  conclusive  proof  that  the  Goods  have  been  received  by  Customer  without  defects  or  damage,  and  in  the 
quantities specified on the bill of lading and shall constitute an irrevocable acceptance of the Goods and a waiver of 
any such claim in connection with the Goods. 

B. Seller warrants to Customer only that the Goods will be free from defects in material and workmanship at the 
time  of  delivery  and,  subject  to  the  exceptions  and  conditions  set  forth  below,  for  the  following  period  (the 
"Warranty Period"): twelve (12) months from the date of shipment by Seller. Seller may provide additional years of 
warranty  coverage  beyond  12  month,  at  the  rate  of  2.5%  of  the  net  sale  price  per  year,  up  to  a  total  of  four 
additional years’ coverage beyond the standard 12 month warranty period. Seller will remedy a defect as set forth in 
paragraph 7 D, below, (the "Warranty"). The Warranty is subject to each of the following exceptions and conditions: 

1.  Customer  must  promptly  (and  in  all  events within  the Warranty  Period)  notify  Seller of any alleged  defect  in a 
written  notice  (the  "Notice")  which  shall  set  forth  the  quantity,  catalog  number,  finish,  original  purchase  order 
number, Seller's invoice number on which Goods were originally billed and a statement of the alleged defect, along 
with digital photographs showing such defects where feasible. 

2. The Warranty shall not apply: (i) to any claimed defect that was capable of discovery upon reasonable inspection 
and deemed to be waived under paragraph A, above; (ii) to any Goods that have been subject to misuse, abnormal 
service or handling, or altered or modified in design or construction; (iii) to any Goods repaired or serviced by any 
person other than Seller's authorized service personnel or to Goods installed other than according  to installation 
instructions, or (iv) with respect to normal wear and tear. 

3. Seller makes no Warranty with respect to parts or components that are not the product of Seller, and specifically 
makes no warranty whatsoever for equipment housed inside enclosure products manufactured by Seller. 

4. The Warranty is Seller's exclusive warranty with respect to the Goods. Seller makes no warranties, guarantees or 
representations,  express  or  implied,  to  Customer  except  as  set  forth  in  this  section.  ALL  OTHER  WARRANTIES, 
EXPRESS  OR  IMPLIED,  INCLUDING,  WITHOUT  LIMITATION  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  OF 
FITNESS FOR USE OR FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED AND DISCLAIMED. 

C. Seller will accept the return of Goods properly rejected under paragraph A, above, or as to which  Notice of an 
alleged breach of Warranty has been timely given and such Goods may be returned to Seller, freight prepaid, but 
only upon Customer's receipt of Seller's written return material authorization ("RMA") and shipping instructions. The 
RMA shall be void if the Goods are not received within 45 days after issuance of the RMA. No deduction or credit in 
respect  of  any  rejected  or  returned  Goods  shall  be  taken  until  Customer  has  received  Seller's  further  written 
deduction or credit/authorization following Seller's inspection to confirm nonconformity or defect. Seller will charge 
to  Customer  any  and  all  costs  incurred  by  Seller  in  connection  with  the  handling,  shipping,  inspection  and 
disposition of any returned Goods that are determined by Seller not to have been nonconforming upon Delivery or 
as to which the warranty hereunder is not applicable. 

D. UPON ANY PROPER RETURN PURSUANT TO PARAGRAPH C, ABOVE, WHETHER IN CONNECTION WITH A REJECTION 
OF  GOODS  OR  AN  ALLEGED  BREACH  OF  WARRANTY  AND  BASED  UPON  THE  CONDITIONS  SET  FORTH  IN  THIS 
PARAGRAPH  7,  SELLER  AGREES  THAT  IT  WILL,  AS  THE  SOLE  AND  EXCLUSIVE  REMEDY  UNDER  THE  CONTRACT  OR 
OTHERWISE, FOR ANY NONCONFORMITY OR BREACH OF WARRANTY, AND AT SELLER'S SOLE ELECTION: (i)  REPAIR 
SUCH GOODS; OR (ii) REPLACE SUCH GOODS. 

Summary of Contents for LIZA 6425H



















Reviews: