TemperZone TZT-100, User Manual, Page: 8 / 24

You now have TWO options
Option 1 - Continue programming as above.
Simply continue to tap the “PROG” Button as you have been previously to advance to the
next day, “Tuesday” in this example “START” then “STOP” times, then Wednesday,
Thursday etc, following the same simple steps previously explained….
OR
Option 2 – “Copy” Program
To copy the values you have just set to other days of the
week tap the up (
) or down ( ) buttons to “ TAG ” each
additional day you wish to copy the currently set days
program to. When you have finished
“Tagging” the days
you desire press the “PROG” button to initiate the copy
process. The word “Copy” will flash briefly to confirm the
copy process and your current days values will be copied
to the days selected. Normal programming will resume at
the next day to be programmed.
Please Note – Your thermostat’s programs may be controlled from a Building
Management System (BMS) thereby overriding any program you may have entered, as
described ab
ove. If the BMS is controlling the thermostat the word “Start” or
“Stop” will flash in the LCD to indicate the thermostat program is under BMS control.