TemperZone TZT-100, User Manual, Page: 14 / 24

(Up)
Use this button to increase the desired room temperature for “Heating” or “Cooling”
modes, or to increase a “value” in programming modes. Also used to force an override of
the pre-programmed temperatures and temporarily replace them with a new higher set
temperature.
(Down)
Use this button to decrease the desired room temperature for “Heating” or “Cooling”
modes, or to decrease a “value” in programming modes. Also used to force an override
of the pre-programmed temperatures and temporarily replace them with a new lower
set temperature.
PROG (Program)
In Residential or Commercial Programmable mode:
Tap the
“PROG” button to begin setting the clock. Press and hold the “PROG” button for
3 seconds to begin programming your daily events.
In Manual mode:
Tap the
“PROG” button to switch between “Day” & “Night” modes. P ress and hold the
“PROG” button for 3 seconds to begin setting the clock.