Tap the
“PROG”
button and now the week day flashes. Use the up (
) or down (
)
button to set this value to the correct day of the week. Tap the
“PROG”
button again to
exit the clock set function or simply wait 30 seconds to auto exit this screen and return
to the main operating display.
Your clock is now set.
Setting Your Desired Temperature
Press and hold the up (
) or down (
) buttons for 3 seconds. The thermostat display
will change to show the word “SET”, and the active set point for the
current mode.
(Heating or Cooling) as you hold the up (
) or down (
) buttons the current set
point will change accordingly.
If Auto mode is selected (Indicated by both “Heat” & “Cool” showing on the display at
the same time); after adjusting the “Heat” set point, wait without touching a button for
3 seconds. The thermostat display will change to show “Cool”, “SET” and your curr
ent
cooling set temperature. If desired change this value with the up (
) or down (
)
buttons. Wait for another 3 seconds for the thermostat to automatically exit this
temperature setting screen. Your new set temperatures will be maintained.
Summary of Contents for TZT-100
Page 1: ...User Manual 1TZT 100 Multi function Thermostat...
Page 24: ......