14
Instructions manual |
www.grupotemper.com
KDP
Remote control
Push button function
Note
• Press
button to start setting operation.
• By using
button, the settings of light level and time can be duplicated to
other detectors.
• Each operation on button can transmit signal for maximum 1sec. No signal
will be transmitted if two or more buttons are pressed simultaneously.
• Presence detector confirms the signal reception by LED flashing for 2sec.
•
All the settings for loadⅡ(CH2) are invalid while detector has only one load
(channel).
Button
Function
To set load I (CH1) on for 8hrs
• By pressing ON button, the load of detector will be turned on
for 8hrs.
• Load will be turned off after 8hrs and return to auto mode. Or
press ON button again to exit this “8hrs on mode” during
this period, detector will return to auto mode.
Or switching off power supply of presence detector for 5sec
and re-supply it again to lead detector to auto mode.
• Load I (CH1) can be lead to off mode by pressing OFF button
under on mode.
To set load I (CH1) off for 8hrs
• By pressing OFF button, the load connected to detector will
be turned off for 8hrs.
• Detector will return to auto mode after 8hrs. Or press OFF
button again to exit this “8hrs off mode” during this period,
detector will return to auto mode.
Or switching off power supply of presence detector for 5sec
and re-supply it again to lead detector to auto mode.
• Load I (CH1) can be lead to on mode by pressing ON button
under off mode.
