Page 7 of 16
Chapter 3 Programming
Press
for 5 seconds and release to enter the setup menu. Press
to select the desired parameter. The upper display
indicates the parameter symbol, and the lower display indicates
the selected value of the parameter.
3–1 Lockout
There are four security levels that can be selected using the LOCK
parameter.
If
NONE
is selected for LOCK, then no parameter is locked.
If
SET
is selected for LOCK, then all setup data are locked.
If
USER
is selected for LOCK, then all setup data as well as
user data (refer to section 1-5) except the set point are
locked to prevent them from being changed.
If
ALL
is selected for LOCK, then all parameters are locked to
prevent them from being changed.
3–2 Signal Input
INPT
: Selects the sensor type or signal type for signal input.
Range
: (thermocouple) J-TC, K-TC, T-TC, E-TC, B-TC,
R-TC, S-TC, N-TC, L-TC
(RTD) PT.DN, PT.JS
UNIT
: Selects the process unit
Range
: °C, °F
DP
: Selects the resolution of process value.
Range
: (For T/C and RTD) NO.DP, 1-DP
3–3 Control Outputs
There are four kinds of control modes that can be configured as shown in table 3.1.
Table 3.1 Heat-Cool Control Setup Value
