DETAILED EXPLANATION
QUICK EXPLANATION
TIMING MODES
Count Up selected
Count Down selected
Count Up selected
Count Down selected
Count Down selected
Count Up selected
Count Up selected
Count Down selected
Count Up selected
Count Down selected
If pulse output is selected
output duration is
If pulse output is selected
output duration is
If or is
set to HOLD, the output is
continuous until the power
is removed from the timer
or the START input or
RESET input is switched.
NOTE 1: If the Gate input is activated the timer enters standby mode with any timing mode selected.
NOTE 2: If the parameter is set to then output Out2 is continuously activated whilst the timer is powered and only deactivates when power is removed from the timer.
In this setup, output Out2 is used to confirm that the timer is powered and all other Out2 output functions cannot be used.
MODE A
DELAYED CYCLE or IMMEDIATE
CYCLE WITH VARIABLE ON AND
OFF TIMES (CLOSE TO START,
RESET WHEN START OPENS)
MODE b
DOUBLE OUTPUT DELAYED
CYCLE or IMMEDIATE CYCLE
WITH VARIABLE ON AND OFF
TIMES (PULSE TO START)
MODE C
DELAY ON ENERGISE, INTERVAL
or DELAYED PULSE (COUNT ONLY
WITH START CLOSED, RESTARTS
WHEN START OPENS)
Page 7
