Do not connect to power
source until after wiring
valves to timer
RESET
PROGRAM
RAIN DELAY
AUTO
OF
F
SE
T
CL
OC
K
SET
DA
TE
BUDGET
HO
W
OF
TE
N
RUN
TIME
STA
RT
TIM
E
PN 57896-50 rJ
Or
1. SELECT LOCATION
.
.
.
.
.
. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RESET
PROGRAM
RAIN DELAY
AUTO
OF
F
SE
T
CL
OC
K
SET
D
AY
BUDGET
HO
W
OF
TE
N
RUN
TIME
STA
RT
TIM
E
.
For detailed instructions on outdoor wiring, please download the
full manual “Outdoor Swing Panel Timer” at www.orbitonline.com
Warning: Check state and local codes. Orbit recommends using
a licensed electrical contractor for outdoor wiring of timer.
Indoor
Outdoor
Clean, dry, and out of direct sunlight
Allow 9 inch clearance for the swing door
A
F
G
H
B
C
D
E
ENTER - To confirm a new setting
MANUAL - To water manually
CLEAR - To clear a setting
PROGRAM - to switch between
programs - A, B, and C
ARROW [
] - To skip to the next
setting / watering station or move to
other programs/settings
ARROW [
] - To go back to the
previous setting / watering station or
move to other programs/settings
RAIN DELAY - To pause operation
for 24-72 hours due to rain or other
factors
[
+
] - To increase a numeric setting
[
-
] - To decrease a numeric setting
Button Function:
I
N
O
P
J
K
L
M
AUTO - Watering mode
SET CLOCK - Set calendar and clock time
SET DATE - Year, Month, and Day
START TIME - Set time to begin watering
RUN TIME - Set watering duration for
each station
HOW OFTEN - Set frequency of
watering days
BUDGET - Adjust overall watering as
a percentage
OFF - Turn all stations off
Dial Position Function:
RESET
PROGRAM
RAIN DELAY
AUTO
OF
F
SE
T
CL
OC
K
SET
DA
TE
BUDGET
HO
W
OF
TE
N
RUN
TIME
STA
RT
TIM
E
A
B
C
F
D
E
G
H
Reset
Indicator
Swing
Out Panel
Release
5. CONNECT TO
ELECTRICAL POWER
Indoor
.
RESET
PROGRAM
RAIN DELAY
AUTO
OF
F
SE
T
CL
OC
K
SE
T
DA
Y
B
UDGET
HO
W
OF
TE
N
RUN
TIME
STA
RT
TIM
E
Outdoor
Warning: See manual for outdoor wiring instructions
4. CONNECT VALVE WIRE
TO TERMINAL
Station 1
Push tab
upward to
release wire
Strip wire
Push in
Only connect one valve to
each terminal (station)
E
Set Watering Days
or Interval
Turn dial to how often to select watering days ([ARROWS]
to move and [ENTER] to select).
To water on Odd or Even days or to water using Intervals
days, please download the full manual “Outdoor Swing
Panel Timer” (at www.orbitonline.com) for instructions.
Set Auto Mode
F
Turn dial to AUTO—you have programmed your timer!
Keyhole
Pre-formed
mounting holes
No. 8 Screw
Wall
1/8"
2. MOUNT TIMER
Level
Screw through one of the
pre-formed mounting holes.
MOUNTING TEMPLATE
GABARIT D`INSTALLATION
GUIA DE COLGAR
4.17”
(106mm)
p 801 295 9820
f 801 951 5815
www.fl uid-studio.net
1065 South 500 West
Bountiful, Utah 84010
proof no:
3
date: 10.05.07
des: SM spck: SM
job no: 07WTM005259
client: Orbit
sku: 57880
upc: ? ????? ????? ?
fi le name: 07WTM005259
57880-04 rA.indd
software: Illustrator CS2
colors
additional instructions:
·
·
crop color
non printing
PMS
????
PMS
????
color
non printing
PMS
????
Registration
K
Printers are responsible for
meeting print production
requirements. Any changes
must be approved by the
client and Fluid Studio.
printed piece must meet
designated specifi cations
on this form.
dimensions:
fl at: w: 9" h: 7"
fi nished: w 9" d: 0" h 7"
© 2007 Fluid Studio. This
work is the property of Fluid
Studio, and cannot be used,
reproduced or distributed
in any way without their
express permission.
Use included mounting template
to mark screw locations.
Hang timer on screw
using keyhole.
To
Timer
Wire Nut
Solenoid
Common Wire
Valve
Connect one of the two wires from each valve to the
common wire leading to the timer (usually white).
Connect the other wire from each valve to one of the
colored wires leading to the timer.
3. CONNECT SPRINKLER
VALVES TO TIMER WIRES
6. ACTIVATE BATTERY
RESET
PROGRAM
RAIN DELAY
AUTO
OF
F
SE
T
CL
OC
K
SE
T
DA
TE
BUDGET
HO
W
OF
TE
N
RUN
TIME
STA
RT
TIM
E
Remove plastic strip to
activate battery
One Lithium CR2032 battery
(included) is required to retain
the program in memory
during power loss. Annual
replacement is recommended.
Remove the plastic strip to
activate the
pre-installed battery.
Battery
TIMER
QUICK START GUIDE
REQUIRED TOOLS:
Phillips Screwdriver
Wire Strippers
Note: The quick start guide is intended to help you
get up and running with your new timer. It includes
basic installation and programming help. For more
detailed and advanced instruction, please download
the full manual “Outdoor Swing Panel Timer” at
www.orbitonline.com
8. ADDITIONAL FEATURES
RAIN DELAY
• Turn dial to AUTO and Press the [RAIN DELAY] button.
• Push the [+/-] to select 24, 48 or 72 hours.
• Press [ENTER] to begin.
• Press [CLEAR] to cancel the rain delay.
MANUAL WATERING
Your timer has the ability to allow you to manually water without
disturbing the preset program.
HELP
1-800-488-6156 or 1-801-299-5555
www.orbitonline.com
Before returning this sprinkler timer to the store, contact Orbit
®
Technical Service at: 1-800-488-6156, 1-801-299-5555.
LISTINGS
The sprinkler timer is tested to UL60730 standard & is ETL
®
listed.
Appropriate international models are CSA
®
and CE
®
approved.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnection : Type 1Y
Input: 120V, 60Hz, 0.2A; Output: 26V, 5OOmA
Rated impulse voltage: 2500V
Pollution degree: 2
The supply cord of this control can be replaced only by the
manufacturer or his accredited service agent.
NOTICE
The information in this manual is primarily intended for the user
who will establish a watering schedule and enter that schedule
into the sprinkler timer. This product is intended to be used as an
automatic sprinkler timer for activating 24 VAC irrigation valves, as
described in this manual.
WARRANTY AND STATEMENT
Orbit
®
Irrigation Products, Inc. warrants to its customers that its
products will be free from defects in materials and workmanship
for a period of six years from the date of purchase.
We will replace, free of charge, the defective part or parts found to
be defective under normal use and service for a period of up to six
years after purchase (proof of purchase required).
We reserve the right to inspect the defective part prior to
replacement.
Orbit
®
Irrigation Products, Inc. will not be responsible for
consequential or incidental cost or damage caused by the product
failure. Orbit
®
liability under this warranty is limited solely to the
replacement or repair of defective parts.
To exercise your warranty, return the unit to your dealer with a copy
of the sales receipt.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: This appliance is not intended for use by young children
or infirm persons without supervision. Young children should be
supervised to ensure that they do not play with the appliance.
7. PROGRAM TIMER
Set Current Time
(e.g. pacific, mountain standard)
A
Turn dial to set clock enter current time (+/-)
Set Date
B
SET
DATE
• Turn dial to SET DATE to enter the Year, Month and Day.
• Use the (+/-) button to select the Year.
• Press [ENTER] to advance to Month and Day.
C
Set Start Time
Time to begin
watering
D
Select Watering Duration
Set for each station
then press enter
Turn dial to run time enter the watering duration (+/- ) for each
station ([ENTER] or [ARROW] to move between stations).
• Turn dial to START TIME position.
• Enter one start time using the (+/-) button.
• Press the [ENTER] button to save.
Note: Additional start times – Additional start times can be
entered if you want your sprinklers to water the same area
multiple times a day. For instructions please download the
“Outdoor Swing Panel Timer” manual at www.orbitonline.com.
To Run all stations at the pre-programed duration
• Turn the dial to AUTO.
• Press the [MANUAL] button. Display will show A B and ALL.
• Press [ENTER] (or wait a few seconds) to begin manual watering.
All stations will water consecutively for their programmed
duration.
To Run a specific station for specified time
• Turn the dial to AUTO.
• Press the [MANUAL] button.
• Press the [
/
] buttons until desired station number appears.
• Press the [+/–] to enter the desired duration.
• Press [ENTER] (or wait a few seconds) to begin manual watering.
To stop Manual Watering press [CLEAR].
Note:
After the [MANUAL] button has been pushed, if a selection
is not made within 5 seconds all stations and programs will begin
watering using the programmed RUN TIMES. If no RUN TIMES
have been set, nothing will happen and the display will return to
the time of day.
BACKUP BATTERY
Your timer requires a CR2032 Lithium battery to maintain your
program in case of an AC power loss.
Tip:
The Battery should be replaced every year, to avoid loss of
programming.
BATTERY WARNING: Chemical Burn Hazard. Keep
batteries away from children.
This product contains a lithium coin cell battery. If a new
or used button/coin cell battery is swallowed or enters the
body, it can cause severe internal burns and can lead to
death in as little as two hours. Always completely secure
the battery compartment. If the battery compartment does
not close securely, stop using the product, remove the
battery, and keep it away from children. If you think the
battery might have been swallowed or placed inside any
part of the body, seek immediate medical attention. The
battery should be disposed of properly and kept away from
children. Even used batteries may cause injury.
Note:
A battery alone will not operate the valves in your sprinkling
system. The sprinkler timer transformer must be connected to an
AC line voltage source.
For instructions on “Water Budgeting”, connecting the timer
to a “Pump Start” relay, replacing the “Backup Battery” or for
installing your timer outdoors, please download the full manual
“Outdoor Swing Panel Timer” at www.orbitonline.com
DOWNLOAD THE ORBIT
B-HYVE LITE APP
Let the Orbit B-hyve Lite app take the guess work out of
programming your sprinkler timer.
Download the “Orbit B-hyve Lite” app.
After download, the app will guide you through setting up an
account and entering information about your landscape.
B-HYVE LITE APP FEATURES
Weather Alerts
Weather alert notifications on your smart device offer suggestions
for when to activate the rain delay feature or adjust programming.
Programming Recommendations
Using historical local weather data and information about your
landscape, the B-hyve Lite app will make monthly programming
recommendations customized to your yard.
Water Audit
Conduct your own watering audit—in app watering app tool allows
for up to 50% savings on water use—catch cup watering tool.
Save Water and Money
Based on historical weather data for your zip code, you will receive
recommendations on how to program your timer for optimal
watering throughout the season, saving water and money.
Zone Identity
Name and photograph each of your watering zones making it easy
to identify each of your water areas.
*Upgrade easily to the B-hyve WiFi Sprinkler Timer and make
smart watering automatic while giving you control of your
sprinkler timer from anywhere in the world. The Orbit WiFi timer
communicates to the B-hyve cloud and automatically adjusts your
sprinkler programming throughout the watering season. B-hyve
WiFi timers are EPA WaterSense certified and may be eligible for
rebates in your area.
**The easy-set-logic timer is not wifi enabled. The B-hyve Lite
app offers programming set-up and adjustments you can manually
enter to potentially improve your watering performance.
BATTERY WARNING: Chemical Burn Hazard. Keep
batteries away from children.
This product contains a lithium coin cell battery. If a
new or used button/coin cell battery is swallowed or
enters the body, it can cause severe internal burns
and can lead to death in as little as two hours. Always
completely secure the battery compartment. If the
battery compartment does not close securely, stop
using the product, remove the battery, and keep it
away from children. If you think the battery might have
been swallowed or placed inside any part of the body,
seek immediate medical attention. The battery should
be disposed of properly and kept away from children.
Even used batteries may cause injury.
