Plenum Kit
Duct/Flange
TC-12HP TC-18HP TC-24HP
TC-36HP TC-60HP
FILTERS
EP
-
OH
10
(1) 10”X20”X1”
EP
-
OH
12
12 inch
(1) 16”X24”X1”
EP
-
OH
16
16 inch
(1) 10”X30”X1”
(1)15”X30”X1”
Maximum
Equivalent
Feet
25
50
50
50
100
Est. External
Static
Pressure
(.20)
(.25)
(.25)
(.25)
(.50)
ACCESSORIES
EVAPORATOR RETURN AIR PLENUM
Evaporator return air plenums are available for installations where it is required to duct air to the
inlet of the evaporator. The evaporator return air plenum allows the user to connect round duct
(flexible or rigid) to the return air intake to reduce air noise and increase the number of options
for solving difficult application problems. The plenum attaches to the front of the unit, replacing
the return air grille. Refer to the table below for configuration and application information.
EP
-
OH
10
for
TC-12HP
transitions the return air opening to a 10-inch round duct.
EP
-
OH
12
for
TC-18HP
&
TC-24HP
transitions the return opening to a 12-inch round duct.
EP
-
OH
16
for
TC-36HP & TC-60HP
transitions the return opening to a 16-inch round duct.
NOTE—When an evaporator return air plenum is installed, it is recommended to set the
evaporator blower speed to high, to avoid coil freeze
-
up
.
FILTER(S)
EVAPORATOR
RETURN AIR PLENUM
14
1
0
inch
Summary of Contents for TC-12HP
