4
APPLICATIONS
COOLING MODE—SPOT COOLER
The
HP-Series
can be used in an open environment to cool specific objects or "spots".
Spot Cooling is a convenient and economical way to provide air conditioning, where
cooling the entire space is impractical. Cool air is discharged from the unit and is
directed where it is needed. Nozzle kits can be used for directional cooling.
AREA COOLER
When the
HP-Series
is installed in an open area, the condenser exhaust duct directs the
warm air away from the space, allowing the evaporator air to cool the specific area.
ROOM AIR CONDITIONER
When ducted properly, the
HP-Series
can be used as a room air conditioner to cool an
enclosed space. Using the condenser return air plenum, additional ceiling kit, and other
accessories, the
HP-Series
can then operate as a room air conditioner with the
condenser air isolated from the conditioned space.
CONDENSER AIR
INLET
(Back of Unit)
OUTDOOR FAN DISCHARGE
“HOT”
WASHABLE
GRILLE
AND FILTER
ELECTRONIC
CONTROLLER
INDOOR FAN
SUPPLY AIR
“COOL”
HP-
SERIES
—COOLING MODE
HP-
SERIES
—COOLING MODE OPERATION / DESCRIPTION
EVAPORATOR
RETURN
Summary of Contents for TC-12HP
