AZ3s USER MANUAL
ST.TEC.054
11 / 60
1.7.
Maintenance and inspection
1.8.
Disposal
WARNING
Do not replace parts. This could be cause of electric shock, fire and bodily injury.
To replace parts, call your TeMec drive distributor.
The equipment must be inspected periodically. If the equipment is not inspected
and maintained, errors and malfunctions may not be discovered and that could
result in accidents.
Before inspection performs the following steps
o
Turn off all input power.
o
Wait at least 5 minutes and check to make sure that the on state LED is no
longer lit.
o
Use a tester that can measure DC voltage (60 V DC or more) and check to
make sure that the voltage to the DC main circuits (VDC and -VDC)
is 45 V or less. Performing an inspection without carrying out these steps
first could lead to electric shock.
WARNING
If you dispose of the drive, have it done by a specialist in industry waste
disposal (*). If you dispose of the drive by yourself, this can result in explosion
of capacitor or produce noxious gases, resulting in injury.
(*) Persons who specialize in the processing of waste and known as "industrial
waste product collectors and transporters" or "industrial waste disposal persons”.
Please observe any applicable law, regulation, rule or ordinance for industrial
waste disposal.
