manualshive.com logo in svg

TEM A07A2200S, Maintenance And Installation Manual

Introducing TEM A07A2200S - a state-of-the-art device that revolutionizes your maintenance and installation processes. Get complete control with our comprehensive Maintenance and Installation Manual. Download this essential manual for free from manualshive.com, and unlock the full potential of your product in just a few clicks.

Share
Download
background image

A07A2200S

2.4 

CHARACTERISTICS IN STEREO 

Signal inputs ------------------------------------------------------------------------------------------ Left or Right 
Input impedance --------------------------------------------------------------------- 600

?

 (balanced) or 10k

? 

Unbalance rejection ----------------------------------------------------------------------------------------->40dB 
Input level------------------------------------------------------------------------------------------- –6 to +12dBm 
Pre-emphasis --------------------------------------------------------------------------------------------75 or 50

? 

s 

Audio frequency response (30Hz to 15KHz)--------------------------------------------------------- <0.15dB 
Audio frequency response (19KHz to 100KHz) --------------------------------------------------------<40dB 
Cross-talk between left and right channel --------------------------------------------------------------->50dB 
Distortion at frequency deviation of 75KHz ---------------------------------------------------------- <0.03% 
Distortion at frequency deviation of 100KHz --------------------------------------------------------- <0.03% 
Signal to noise referred at deviation of 75KHz --------------------------------------------------------->80dB 
Suppression of 38KHz -------------------------------------------------------------------------------------->70dB 
Spurious suppression outside band -------------------------------------------.in according to ETS 300-384 
Pilot reference for RDS encoder (19 Khz out) ----------------------------------------------------------- 1Vpp 

2.5 

SCA  CHARACTERISTICS 

Input (SCA1, SCA2) --------------------------------------------------------------------------- BNC unbalanced 
Input impedance --------------------------------------------------------------------------------------------- 10K

? 

Frequency response (50KHz to 100KHz)---------------------------------------------------------------<0.1dB 
Distortion -----------------------------------------------------------------------------------------------------<0.1% 
Modulation capability ------------------------------------------------------------------------------------0 to 10% 

2.6 

READOUT ON LCD DISPLAY  (40x4 character ) 

Forward power resolution ------------------------------------------------------------------------------------ 10W 
Reverse power resolution-------------------------------------------------------------------------------------- 1W 
Modulation resolution----------------------------------------------------------------------------------------1KHz 
Line voltage resolution ----------------------------------------------------------------------------------------- 1V 
Power amplifier current resolution--------------------------------------------------------------------------0.5A 
Heatsink temperature resolution------------------------------------------------------------------------------ 1°C 

2.7 

REMOTE CONTROL 

COM1 (front panel) ---------------------------------------------------------------------------------------- RS232 
COM2 (rear panel) ----------------------------------------------------------------------------------------- RS232 
COM3 (rear panel) ----------------------------------------------------------------------------------------- RS485 
Personal computer software------------------------------------------- National Instruments LAB-VIEW ® 
Transmission protocol ----------------------------------------------------------------------- AES-EBU SP 490 

380 221 R02 

Pag. 8 

Summary of Contents for A07A2200S


























































































































Reviews:

No comments

Related manuals for A07A2200S

Panasonic CZ-RWSC3 Installation Instructions Manual preview
CZ-RWSC3
Brand: Panasonic Pages: 7
Icom IC-229A Instruction Manual preview
IC-229A
Brand: Icom Pages: 48
Icom IC-R9500 Service Manual Addendum preview
IC-R9500
Brand: Icom Pages: 392
Icom IC-A110EURO Instruction Manual preview
IC-A110EURO
Brand: Icom Pages: 24
Icom iC- r8500 Service Manual Addendum preview
iC- r8500
Brand: Icom Pages: 286
Jamara SCX 2,4 GHz Instructions Manual preview
SCX 2,4 GHz
Brand: Jamara Pages: 8
JAMO DMR 61 Instruction Manual preview
DMR 61
Brand: JAMO Pages: 18
JAMO DVR 50 User Manual preview
DVR 50
Brand: JAMO Pages: 17
JAMO DMR 45 Features preview
DMR 45
Brand: JAMO Pages: 1
Midland Handheld VHF Marine Transceiver User Manual preview
Handheld VHF Marine Transceiver
Brand: Midland Pages: 24
Datavideo HBT-11 User Manual preview
HBT-11
Brand: Datavideo Pages: 15
S+S Regeltechnik THERMASGARD ALTM1 Operating Instructions, Mounting & Installation preview
THERMASGARD ALTM1
Brand: S+S Regeltechnik Pages: 16
Gilbarco TRIND MULTI 1 C00012-001-NF-D Installation Manual preview
TRIND MULTI 1 C00012-001-NF-D
Brand: Gilbarco Pages: 26
Ritron DR-142 Operating And Service Manual preview
DR-142
Brand: Ritron Pages: 13
Endress+Hauser HART Proline 400 Brief Operating Instructions preview
HART Proline 400
Brand: Endress+Hauser Pages: 36
GES AudioTroll 9400 Operating & Installation Manual preview
AudioTroll 9400
Brand: GES Pages: 13
X-Digital System XDS-PRO Quick Start Manual preview
XDS-PRO
Brand: X-Digital System Pages: 11
REFI Multimedia ReelBox Lite Installation And Startup - Quick Reference Manual preview
ReelBox Lite
Brand: REFI Multimedia Pages: 32

Brands by name

Popular brands

Load more brands