Telycam TLC-600-IP-5-4K, User Manual

Page: 18 / 28

17
INFO
CONTROL VER Camera control firmware version
CONTROL DATE Camera control firmware releasing date
FORMAT Current video output format
BAUD RATE Current RS232 baud rate
IP ADDR Camera IP address
NET MASK Current subnet mask
RETURN Return to the previous menu
SET IP ADDRESS IN MENU
1. Press
“
menu
”
button for 3 seconds, enter IP setting menu.
2. Using
“
up
” “
down
”
navigation key to select parameter needed to set. IP, Mask, Gateway ect can be set.
3.Short press
“
Home
”
key to setting mode, current setting parameter starts flickering
4. Short press number key to set needed parmater. After finishing setting, press
“
Home
”
key again.
5. If need to exit to menu, press
“
menu
”
key. Note: Only press
“
Home
”
key after fininshing setting can save current paramter.