Telycam TLC-600-IP-5-4K, User Manual

Page: 17 / 28

16
GAMMA Gamma curve selection
Default
：
0
RETURN Return to previous menu
IMAGE
WB MODE
Optional: AUTO,INDOOR,OUTDOOR,MANUAL,OUTAUTO,SODIUM
LAMP AUTO ,SODIUM LAMP
Default
：
ATW
R GAIN Red gain level: 0~255, only valid under manual white balance mode.
Default
：
AUTO
B GAIN Blue gain level:0~255 , only valid under manual white balance mode
Default
：
AUTO
DEFOG OFF, 1~15
Default
：
OFF
RETURN Return to previous menu
QUALITY
2D NR
2D noise reduction: the bigger value, the less noise on image, the
lower resolution
Default
：
OFF
3D NR
3D noise reduction:OFF/AUTO/0~4, the bigger value, the less motion
noise on image, high value will cause image smear.
Default
：
AUTO
SHARPNESS Sharpness setting: 0~15, the higher value, the higher sharpness of the
edge of the image
Default
：
6
CONSTRAST Set contrast level Default
：
8
SATURATION Set saturation. Default
：
8
BRIGHT Whole image bright Default
：
8
D_WDR Set wide dynamic range: OFF, 1-6
Default
：
OFF
RETURN Return to previous menu
CONTROL
MIRROR Default: OFF
FLIP Default
：
OFF
D/N MODE Default
：
Day
GAIN LIMIT
Default
：
128
RETURN
RESET
CAM RESET Reset camera parameter to default
PTZ RESET Reset pan/tilt parameter to default
ALL RESET Reset all parameter to default
RETURN Return to the previous menu