Telycam TLC-600-IP-5-4K, User Manual

Page: 10 / 28

9
VISCA PROTOCOL
Part1 Camera Return Command
Ack/Completion Message
Command
Packet
Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera 8
Error Messages
Command
Packet
Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a command with illegal
command parameters is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due to current conditions. For
example, when commands controlling the focus manually are received during auto
focus.
Part2 Camera Control Command
Command type function command
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low)~7(high)
Wide(Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF
pqrs: Zoom Position (0(wide)
~0x4000(tele))
Direct with
speed
8x 0A 04 47 0t 0p 0q 0r 0s FF
t: spd 0~7
pqrs: Zoom Position (0(wide)
~0x4000(tele))
Combine Mode 81 01 04 36 00 FF Combine with optical zoom control
Separate Mode 81 01 04 36 01 FF Separate with optical zoom control
Stop 81 01 04 06 00 FF Enable In separate mode
Tele (Variable) 81 01 04 06 2p FF Enable In separate mode
Wide (Variable) 81 01 04 06 3p FF Enable In separate mode
Direct 81 01 04 46 0p 0q 0r 0s FF Enable In separate mode
CAM_Focus
Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Far (Variable) 81 01 04 08 2p FF p=0 (Low) to 7 (High)
Near (Variable) 81 01 04 08 3p FF p=0 (Low) to 7 (High)