56044702 14
© 2012 Telular Corporation
When selecting a mounting location, do not mount this unit in an area
where the general public could reasonably be within 20cm (8 inches) of
the antenna.
Note 1:
Optimum RF performance can usually be found at the highest
point within a building with the fewest number of walls between the
Telguard’s antenna and the outside of the premises.
Note 2
: To avoid interference with other electronic devices operating
in the area, avoid mounting the Telguard’s antenna near other
electronic devices.
Note 3
: The Telguard TG-1 Express unit with supplied dipole antenna is
designed for indoor installations ONLY.
These considerations should be coupled with the best RSSI indication
obtainable. Care should be taken to ensure that a large metal object
such as a refrigerator or a metal cabinet is not located on the opposite
side of the wall.
If moving the Telguard to a different location is not practical, then you
may need a cable and accessories (sold separately) to remote the
antenna in order to receive adequate radio signal strength. Pick a high,
visually secure spot using the guidelines below.
Tips for Improved Radio Signal Reception
The higher the antenna the better. So, start in the drop
ceiling above the unit and proceed up from there, to the roof
if necessary.
Remember, the antenna should be as inconspicuous as
possible for greatest visual security.
Try to keep the antenna away from sources of RF interference,
including pumps, compressors, ovens, etc., or where metal
objects can shield it or otherwise block the cellular radio RF
signal.
