Pulse Dial Option
Press:
#
*
12
*
<pulse-dial> #
0
= disable Pulse Dialing capability (default)
1
= enable Pulse Dialing capability
Auto Dial
The SX5 will recognize frequently called phone numbers and send them without waiting for the
Dial Delay. Up to 50 numbers that have been successfully called at least twice will be stored
when this feature is enabled. Any loss of power to the SX5 will clear this list.
Press:
#
*
21
*
<auto dial> #
0
= disable Auto Dial option (default)
1
= enable Auto Dial option
On-Hook Idle Voltage
This feature has been added to the SX5 and allows control of the on-hook idle voltage at the RJ-
11. It is recommended that only a qualified technician for PBX or payphone environments should
only change this parameter. Contact your installer for more information.
Press:
# * 134 * <mode> #
0
= Low battery mode and forward active when on-hook (default).
1
= High battery mode and low power standby when on-hook
Caller ID
The SX5 will support Caller ID device operation. The default format setting is designed to work
for most Caller ID devices.
Change Caller ID Format
The following key sequence is used to select the Caller ID (CID) format:
Press:
#
*
84
*
<CID format> # <Flash>
1
= MDMF (Multiple Data Message Format) (default)
2
= SDMF (Single Data Message Format)
3
= OFF
Set Time and Date
Allows for a set time and date to be displayed on a connected caller ID device.
Set Date
Press:
# * 131 * <month> * <day> * <year>
<month>
= 1-12
<day>
= 1-31
<year>
= 2000-2999
Set Time
Press: # * 130 * <hours> * <minutes> #
<hours>
= 0 - 23
<minutes>
= 0 - 59
Reset User Factory Defaults
Reset all user programmable options back to the factory defaults.
Press:
#
*
107
*
1 #
Phonecell
®
SX5T CDMA
8
User Manual
