SX4e TDMA 800
•
SX4e Tri-Mode
18
Technical Manual
Primary B-Side Non-Standard Control Channel Option
The following key sequence is used to select the non-standard primary control channel range for B-
side AMPS systems:
Press:
#
*
90
*
<first ACC>
*
<last ACC> #
The first ACC and last ACC values must be in the range of 0-799 or 991-1023. If the value is not in
the range, it will be considered invalid and the FWT will not update or store this value; the currently
stored value will remain. The factory default for
first ACC is 334
and for
last ACC is 354.
Secondary A-Side Non-Standard Control Channel Option
The following key sequence is used to select the non-standard secondary control channel range for
A-side AMPS systems:
Press:
#
*
91
*
<first ACC> * <last ACC> #
The first ACC and last ACC values must be in the range of 0-799 or 991-1023. If the value is not in
the range, it will be considered invalid and the FWT will not update or store this value; the currently
stored value will remain. The factory default for
first ACC is 708
and
for last ACC is 688.
Secondary Control Channel Option
The following key sequence is used to select the non-standard secondary control channel range for
B-side AMPS systems:
Press:
#
*
92
*
<first ACC>
*
<last ACC> #
The first ACC and last ACC values must be in the range of 0-799 or 991-1023. If the value is not in
the range, it will be considered invalid and the FWT will not update or store this value; the currently
stored value will remain. The factory default for
first ACC is 737
and
for last ACC is 757.
Secondary Paging Channel Option
The following key sequence is used to select the secondary paging channel AMPS systems:
Press:
#
*
93
*
<paging chan> #
The paging channel value must be in the range of 0-799 or 991-1023. If the value is not in the
range, it will be considered invalid and the FWT will not update or store this value; the currently
stored value will remain. The factory default for is
708.
