Teltronics Arcata 2806 CIP-D, User Manual

Page: 41 / 118

PHONE SETUP
28xx CIP-D User Guide 19
3. Connect to the network and power.
NOTE : If you are using a 2826 phone as a digital
endpoint, see Configuring the 2826 Phone on
page 24.
You can connect the network and power
source in either of two ways. (Your system
administrator will advise you on which one to
use):
• Use a PoE-compliant switch or hub.
IMPORTANT : Do not connect a 2826
phone configured as a digital endpoint
to a PoE-compliant switch or hub.
• Connect the phone to the AC power
directly using the power adapter.
Note
If inline power is provided, do not
install the AC adapter. Make sure the
Ethernet cable and switch/hub is PoE
compliant (except for a 2826 configured
as a digital endpoint).
The Internet Port can also be connected
to a Hub/Switch/IP PBX or other internet
devices.