8
Handheld GPS/GSM Tracker GH1201
User’s Manual v1.05
Electronic specifications
Parameter
Min
Norm
Max
Supply voltage (DC)
4.5V
5V
5.5V
Use of electric current
2mA
360mA
2500mA (10ms)
Battery voltage (DC)
3.7V
4.2V
Charger voltage (DC)
4.5V
5V
5.5V
Charger electric current
600mA
1000mA
3. GETTING STARTED
Inserting SIM card and battery
All SIM cards must be kept in a place out of small children’s reach. You may request your SIM card supplier
to provide SIM cards and information about the use of SIM card-related services. The supplier may be a
service supplier, a network operator or another seller. The SIM card must be inserted in the way as set
below.
To insert the battery correctly, please connect its connector to the connector of the device. Afterwards hold
the battery so that the wire of the battery is directed to the left. Bend the wire carefully into two parts and put
it along the left internal side of the device; afterwards, put the battery along the left side of the device, too.
Note: before removing the cover,
switch off the device and
disconnect it from the charger or
PC. The device must be always
kept and used with a cover and the
screw screwed tightly.
1
2
3
