17
Handheld GPS/GSM Tracker GH1201
User’s Manual v1.05
When you open the
Alarm
window, please
choose the type of the warning signal (
Alarm
Send Method
) first. There are two options: by
up to five
SMS
messages or
SMS and Call,
meaning up to five SMS messages and a
parallel call to one phone number specified in
the below box
Call Number 1
.
In the box
Alarm SMS Sending Interval
(sec.)
you can specify the frequency of
sending
SMS
messages. After the specified
time passes, the device will automatically
send
Alarm
SMS
messages. The time is
indicated in seconds.
In the box
Alarm Duration Time (sec.)
you
can specify the duration of the alarm. After the
specified time passes, the alarm will be
automatically turned off. The time is indicated
in seconds.
In the box
Alarm Delay
you can specify the
Alarm
actuation time. After the specified time
passes the Alarm will be activated. During this
time period the alarm procedure can be
cancelled by pushing a defined Alarm Off
button.
Delay sound notification
activates an
additional acoustic signal for this alarm
preparation phase.
Uncheck
Keyboard lock valid for Alarm
button
if you want the Alarm button to be
always
active - even if the keybord is locked.
You can fix the automatic data update interval
(
GPS Logging Interval
). If this function has
been activated, the device will activate the
GPS module after the set time. The
geographical co-ordinates will be located and
recorded into the device memory.
If the device has been requested to specify
the current location, the search may take up to
3 minutes.
If the automatic data update interval has been
activated, the device will automatically update
the data about its location within the internal
memory.
If you wish to get an immediate reply with the
last geographical co-ordinates from the
memory of the device, you need to activate
the function
Log Tracking
.
If this function has been activated, the device
will not start to track the new geographical co-
ordinates (up to 3 minutes process as
indicated above) but will directly send the
newest location stored within the internal
memory.
On top you can setup the
Event Based
Tracking
settings. This track you can activate
by pressing a button or sending a special
SMS.
The
Track Update Interval
is setting the
interval in which GPS coordinates will be
acquired.
With
Track Logging Duration
you can define
the time period after which the Event Based
Tracking will be finalized.
8
9
