25
Handheld GPS/GSM Tracker GH1201
User’s Manual v1.05
8. MAINTENANCE AND REPAIR
This device is a high-quality design product; therefore, it should be handled carefully. The following advice
will assist you in meeting the guarantee requirements.
-
Do not let the device get wet. In the precipitation, humidity and all sorts of liquids there may
be minerals which may be a cause of corrosion of the electricity chains. If your device got
wet, take out the battery and let the device get fully dry; afterwards, insert the battery again.
-
Do not use or keep the device in dusty and dirty places. Its moving and electronic parts
may be damaged.
-
Do not keep the device in high temperatures. High temperature may reduce the life time of
the electronic parts or damage the batteries and deform or melt some plastic parts.
-
Do not keep the device in cold environment. If the device warms up to the room
temperature, humidity may start condensing which may cause the failure of electricity
circuit boards.
-
Do not try opening the device except as specified in this Manual.
-
Do not throw, knock or shake the device. By handling it in this way you can break internal
circuit boards and small moving parts.
-
Do not clean the device with strong chemicals, solutions or cleansing agents.
-
Do not paint the device. The paint may block the moving parts and prevent them from
operating well.
-
Use the supplied or approved antenna only when it needs to be changed. Antennas which
are not approved, their improvements or supplements may damage the device. By using
supplements which are not approved you may also infringe the legislation in the field of the
use of radio equipment.
-
The chargers must be used indoors only.
-
Before handing your device to the repair centre, save a copy of the significant data (e.g.
settings, travel routes).
All these recommendations are equally important for your device, battery, charger and any other
supplement. If any of the devices is not functioning properly, bring it for examination to the nearest
authorised repair centre.
The sign on the packaging means that the user’s manual must be read before making
use of this product.
The sign on the packaging means that the electric and electronic equipment to be utilised
must be stored separately.
In case you have problems with the use of the product beyond your possibilities to solve it, please address
them to the Technical Assistance Department by e-mail
. We would be pleased to be of
any assistance to you.
