102
Figure 83 Monitoring filters
Monitoring filters menu allows choosing which data will be shown in configuration
menu. To enable/disable particular data monitoring use checkbox next to data name. To enable
all data monitoring push “Select all” button, to disable all data monitoring push “Select none”
button.
Note: CAN monitoring is FM5500 configurator function; it does not enable data
sending to server. In order to configure data sending to server refer to
Configuration section.
Offline configuration
When FM5500 device is not connected to CAN bus you can configure CAN data
sending by pushing “Offline configuration” button. When offline configuration is enabled a
configuration table of all FMS standard CAN data is shown.