Telstra VVX 1500 Phone Guide | June 2014
Page 1
Telstra VVX 1500 Phone Guide
Your phone has a touch-sensitive screen. To
access features or obtain information, tap the
menu items, arrow keys, soft keys (the keys
along the bottom of the touch screen) and field
that display on the touch screen.
If you are required to initially configure your IP
phone you will be advised of the Username and
Password. This information only needs to be
entered once via the QSetup soft key.
Tap the
QSetup
soft key
Tap the
Server User
field
Enter the Server User credentials (obtain this
information from Telstra.
This number will be your phone number)
Tap the Server Password field
Tap the
Mode
soft key and tap
123
(to select
numbers)
Enter the Server password (obtain this
information from Telstra)
Tap
Save Config
to Save the Config
You will now need to manually reboot the phone
Press the
Home
button
Tap Settings
Tap
Basic
, swipe your finger up the screen and
Tap
Restart
Phone
Tap the
Yes
soft key (to confirm)
Note 1:
Restarting the phone may take a few
minutes
Note 2:
If your phone has been preconfigured
the
QSetup
soft key will not be visible
Note 3:
This is only required for phones that are
on DMS (Device Management System)
platform.
Your phone displays video in 2 windows, a
small picture-in-picture (PIP) window at the top-
right of the touch screen, and a larger window
centred in the middle of the touch screen.
During a call, you can tap the PIP to swap
the windows the video displays in. You can
also display video on the entire screen (full
screen mode) by tapping the larger window.
Ensure you open the privacy shutter
(centred above the touch screen) using the
privacy shutter adjuster (centred above the
camera). You can also adjust the camera barrel
(located at the back of the camera) up or down.
If you require your phone to receive video and
not send video, follow the steps below to
disable the sending of video.
To enter the Main menu, tap
Menu
Tap
Settings, Basic, Video, Video Call
Settings
Tap
Auto Start Video Tx
– set this to disabled
Tap the
Save
soft key
(All calls will have video from the phone
blocked)
If the user decides to send video during the call
Tap the
Video
soft key that comes up during
the call,
Tap the
Start Video
soft key that’s shown and
two way video is activated
During a video call, tap the
Video
soft key to do
the following:
To start or stop transmitting video, tap the
Start
Video
or
Stop Video
soft keys
To display the video that appears in the large
window on the entire screen, tap the Full
Screen soft key. To return to normal video, tap
the Full screen video
To toggle the video to display large far-site
video with PIP near-site video or vice versa, tap
the Swap soft key
To exit the video options, tap the
Back
soft key
Note:
The video soft keys are NOT available
during audio-only calls
