TS1000BS Base Station User Menu
17
losses. All antenna power and control lines are connected at the junction box
located at the bottom of the cabinet.
Installation procedures are listed:
a)
Install the station wall or pole with a hardware kit
b)
Connect the ground terminal to a substantial earth ground located as close as
possible to the station and in as straight a line as possible.
WARNING
Even if a three-wire grounded primary AC
power source is available, the radio equip-
ment must be grounded separately to prevent
electrical shock hazards and provide lighting
protection.
c)
Connect the male plug of the three-wire AC line cord to the wall outlet
provided near the station.
NOTE
A power ON-OFF switch is not provided on
the station, therefore, the equipment is
immediately operational when the power
cord is plugged into a live AC outlet.
