56
Transponder number
Use this option to select a transponder from the built-in transponder list. Once selected from the list, the Frequency,
Polarity and Symbol rate fields will be updated accordingly. Alternatively you can set these fields manually.
Frequency
Set the frequency of the reference transponder.
Polarity
Set the polarity of the reference transponder.
Symbol rate
Set the symbol rate of the reference transponder.
Tuner IF and Channel ID (Unicable only)
This option allows you to select the Unicable Tuner IF frequency (also known as User Band frequency) and the
channel ID for the receiver. In a typical Unicable installation, you are able to connect multiple receivers to a single
LnB or Multiswitch output, with each receiver set to connect to a different Unicable user band and channel ID.
Signal strength and signal quality bars
In two level bar meters, on the right side of the screen, the user can see the strength and quality of the signal
coming from the antenna dish to the tuners. These two meters can be used while doing a fine-tuning of the antenna
position. The antenna has to be adjusted to have maximum possible signal strength and signal quality.
