3-1
Section 3
INSTALLATION PROCEDURES
3.1
GENERAL
This section provides the wiring, installation, configura-
tion programming and station initialization procedures.
A troubleshooting table is included at the end of the
section.
3.2
SELECTING A LOCATION
Select a location which is not subject to excessive heat
or humidity. The base can be placed on a desk or table
top near a standard 120VAC outlet and DIGITAL sys-
tem modular extension jack. It can be mounted on a
standard AT&T or GTE wall plate using the Wall Mount
Adapter included (see Section 4.3)
3.3
WIRING THE UNIT
WARNING
When installing this equipment, all standard safety pre-
cautions should be observed to reduce the risk of fire,
electrical shock and injury.
3.3.1
Connecting the telephone cord
•
Connect one RJ11 plug in the designated modular
extension jack connected to the DIGITAL system.
•
Connect the other RJ11 plug in the socket marked
"LINE IN" on the Base unit.
