79-070-0007/9, Issue 1
4-2
Figure 4-1:
Wall Mounting the Base Unit
1. Insert the two protrusions at the top of the Wall Mounting piece
in the notches at the top of the Base Unit, and then rotate the
bottom of the Wall Mounting piece towards the Base Unit until
it snaps into place.
2. Plug the AC Adapter into the Base Unit.
3. Run the AC Adapter cord through the thinner molded channel
in the Wall Mounting piece.
4. Plug one end of a modular RJ-11 cord into the LINE IN jack on
the Base Unit.
5. Run the cord through part of the middle molded channel, mak-
ing sure to leave just enough slack to reach the wall plate.
6. Plug the other end of the cord into the modular jack on the wall
plate.
7. Align the mounting holes of the Base Unit over the posts of the
wall plate and slide down until firmly locked in position.
8. Plug the AC Adapter into a standard 120V AC mains outlet.
