Section 3: INSTALLATION PROCEDURES
3-3
•
Connect the AC Adapter output plug in the Charger Stand
jack marked "DC IN 9V ".
•
Connect the AC plug into the mains socket.
•
CHARGING THE BATTERY IN THE HANDSET: Place the
handset into the Charger Stand and check that the "Charge
1" indicator lights.
•
CHARGING THE SPARE BATTERY PACK: With the label
facing forward, push the battery into the charging slot until it
locks in place, as shown below. Check that the "Charge 2"
indicator lights. To release the battery when charging is
complete, slide the locking tab off the top of the battery
pack.
Figure 3-2: Connecting the Charger Stand AC adapter
3.5
DEFINING THE EXTENSION
In principle, the Telrad Tracker Set is configured in the same
way as any other DIGITAL system extension. Therefore, the
instructions which follow will only present the items which are
specific to the Telrad Tracker Set. Familiarity with system con-
figuration, as presented in the ADMINISTRATION MANUAL is
assumed.
3.5.1
Defining the extension
The basic difference in programming the Telrad Tracker Set is
that the following features are disabled:
•
Background Music
•
Handsfree Answerback (received)
•
Page (received)
•
Barge in (received)
•
Call waiting (received)
•
Camp-on tone (received)
The procedures which follow provide only the programming
requirements specific to the Telrad Tracker Set:
