Telrad CPE12000 User Manual
CPE User Manual V1.5
12
Figure 5-1-2 ND&S
Uplink QAM64: Enable/Disable
Scan Mode: Full band/Dedicated Earfcn
Band: Supported Band selection (Default band is 46)
5.1.3
PLMN Selection
On this page, include “Network Mode “and “Allow Roaming”
Figure5-1-3 PLMN Selection
Network Mode: there are two modes Nomadic, Mobile
Nomadic: modified scanning eNB selection.
Mobile: regular scanning PLMN/ eNB selection.
Allow Roaming:
If “allow roaming” is checked, then CPE first selects eNBs from the Home/ Equivalent
PLMN-IDs, Otherwise If not available, it tries connection to “any” PLMN-ID.
If “allow roaming” is not checked, the CPE is allowed to connect to eNBs from Home/
Equivalent PLMN-IDs only.
Equivalent PLMN-ID List: Home PLMN-ID can be created automatically from SIM’s IMSI
(read-only). Customer can also add PLMN-ID.
5.1.4 eNB Settings
On this page, include “Preferred eNB Settings” , “ Preferred eNB List” and “ Sorted eNB List”.
