Telrad CPE-12000SG-PRO-1D-3 Series, User Manual

Page: 65 / 110

LTE Outdoor CPE12000 | User Manual 65
Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
Network > Port Management >Port Trigger
The table allows you to configure Port Trigger rules. Port Trigger is a way to automate port
forwarding. Outbound traffic on predetermined ports ('trigger port') causes inbound traffic to
specific ports (call it port P here) to be dynamically forwarded to the host which uses trigger port.
Port P does not open if port triggering is not activated. Click “ Add + ” button to add a new rule,
clicking “ Delete ” icon ( ) to delete the rule.
Application Name: Name of the port trigger rule.
Triggered Range: Traffic passing through t he port in the triggered range would automatically
open the forwarded port in the forwarded range. The ports in the triggered range are LAN
ones.
Forwarded Range: The ports that would be automatically opened when traffic pass through
ports in the triggered range. The ports in the triggered range are WAN port.
Enable: Enable/Disable the rule.
Delete: Delete the rule.