Telrad CPE-12000SG-PRO-1D-3 Series, User Manual

Page: 50 / 110

LTE Outdoor CPE12000 | User Manual 50
information.

If “Static” mode is selected, users have to manually enter the required information in
below fields.
Host Name: currently no function.
WAN IP Address/ Subnet Mask/ Gateway Address: These values are un-editable when the
connection mode is “Automatically” and editable when the mode is “ Static ”.
Two WAN IP, DNS
WAN MTU: This value is “Maximum Transmission Unit”. The size of a single packet can only
be as large as MTU. If the size of the packet exceeds MTU, the packet would be fragmented.
Enable NAT-Q: enable/disable wan accelerator
DNS1/2: Domain Name Server, editable when users select “Static” in “Connection Mode”.
Otherwise, DNS information will be given by DHCP server.
Cancel button Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.