SP-401 User Manual
Telpar, Inc.
Page 8 of 25
3.2.2 Parallel Interface Cable
This parallel cable configuration is used to interface the SP-401
with all IBM and IBM compatible systems. This cable connects the
interface to the printer with a 1:1 cable connection, and is terminated
by a DB-25P on each end. This 25 pin cable configuration is
available at most computer supply stores. Ex. Pin 1 to pin 1, pin 2 to
pin 2, pin 25 to pin 25.
Note:
Cable length for the standard mode of
parallel printing should be limited to 25 feet or less.
Note:
Cable length for the standard mode of parallel printing
(through MS-DOS) should be limited to 25 feet or less.
