Telos Alliance Linear Acoustic SDI XNODE, User Manual

Page: 26 / 60

17
| Section 3
More on ID Values
Number ranges of 1-99 (nn) support small-to-medium networks with up to 99 nodes. The node ID
determines the IP address (10.216.0.1nn) and the source channel numbers (nn01-nn08).
Number ranges of 100-319 (abc) support large networks with up to 2299 nodes. When the 3 digit
ID is being used, a second level identifier becomes available with range of d=<0-9>. The node ID
determines IP address in range: 10.216.ab.1cd. Channel numbers: abcd1-abcd8.
Once the xNode has been assigned an ID value, the device has an IP address that can be used to access its HTML
configuration interface. Each input has been assigned a unique L channel number. The next configuration
steps are to enter in descriptive names to the inputs and outputs and to assign L sources to the destina-
tions. The Simple Setup page is covered later in the chapter.
iProbe configuration
Axia iProbe is a stand-alone Windows software application that provides management, support, and control of a
L network and devices (SDI xNodes, other xNodes, Axia Control Surfaces, and other supported L
devices) in a friendly, unified environment.
Figure 19 - iProbe Screen