5
User Guide for Tosblue-X2
TosBlue-X2 may connect with 2 Bluetooth receivers at the same time
– and the
pairing procedure is slightly different.
Do this:
-
Turn your TV ON.
The TosBlue-X2 LED starts flashing quickly red and blue, indicating the unit is in
“Bluetooth Search Mode” and is ready to be paired with a new Bluetooth receiver.
If not paired within 2 minutes, the
unit enters “Ready Mode” and the LED will be
flashing at a slower pace.
NOTE:
In “Ready Mode” you may at any time connect a previously paired Bluetooth
receiver simply by turning the power ON.
A new
device must be paired the first time under the “Bluetooth Search Mode” –
during the 2 first minutes.
Connecting a receiving Bluetooth unit for the first time to TosBlue-X2
Here is an example pairing with our 2 x BHX headsets. Let us call them A and B:
-
Press the ON/OFF/pairing button for several seconds on headset A, until the LED
flashes red and blue.
-
Release the button and headset A will pair.
-
Turn headset A OFF.
-
Pair headset B as you did for headset A. When connected, turn ON headset A
again. (press only until blue light flashing).
When paired, the LED of the TosBlue-X2 starts to show a blue light fading slowly in
and out - indicating the unit is paired and ready to transmit sound.
