2
NOTE:
Do not sharply bend the optical cable as it may be severely damaged, causing weak or no
signal to go through.
- Connect one end the optical cable to the unit.
(
Middle connector
)
Make sure that
the cable is well connected …..i.e. well pushed into the socket.
NOTE:
If not well connected, no or weak signals may be transmitted and you may
experience sound disturbance, or no sound at all!
-
Connect the USB cable to the unit. (
Right connector
– see picture above
)
-
Peel off the white coating (protecting) tape covering the Velcro pad on the unit.
-
Fasten the unit on the back of the TV so the top of the unit is visible from the front.
-
Connect the other ends of the 2 cables to the corresponding connectors on your TV.
D O N E
NOTE:
If your TV does not have an optical output port
…. you can use the 3,5 mm cable
instead. (Left connector
– see picture above)
