3
User Guide for Tosblue-X
TosBlue-X can only connect with one receiving unit
– for example one headset.
Once you have installed the TosBlue-X unit
– you are ready to use it for the first
time.
- Turn your TV ON.
The LED on top of the TosBlue-X unit starts flashing quickly red and blue.
This means the power is applied and the unit
has entered “Bluetooth Search
M
ode” and is ready to be paired with a new Bluetooth receiver.
If not paired within 2 minutes,
the unit will enter “Ready Mode” indicated by
the LED flashing red and blue at a slower pace.
NOTE:
In “Ready Mode” you may connect any Bluetooth unit previously paired with
just by turning power ON.
Pairing a receiving Bluetooth unit for the first time
NOTE: This must be done within the first 2 minutes after the TosBlue is turned ON and the
unit is in “Bluetooth Search Mode”.
Here is an example pairing with our BHX headset.
-
Press the ON/OFF/pairing button for several seconds on the BHX headset, until the
LED flashes red and blue.
-
Release the button and the units will pair.
