1
Installation
and
User Guide
for
TosBlue-X
and
TosBlue-X2
Installation Guide for TosBlue-X and TosBlue-X2
NOTE: The installation procedure for both products is the same.
If your TV is equipped with an optical output port (SPDIF), then you are
recommended to use the enclosed optical cable
– and not the 3,5 mm signal cable.
If your TV does not have the optical output, then use the 3,5 mm stereo signal
cable instead.
(Only 2 of the 3 included cables should be used).
Optical cable 3,5 mm cable USB cable
The unit should be located on back of your TV so that the top of the unit is visible
from the front.
TosBlue mounted on the back of the TV
-
Find a flat surface on the back of your TV and make sure the surface is clean.
-
Both ends of the optical cable are protected with plastic caps. Remove the
caps.
