Gate Control 20 Quick guide
3
PUTTING INTO OPERATION:
1. Choose the SIM card services according to the device functions you would
like to use (voice call, SMS service).
2. Enable the caller identification service on the SIM card at the mobile service
provider.
3. Disable the PIN code request, voice mail and notification about missed calls
on the SIM card.
4. Remove the SIM card bay cover of the device and install the SIM card.
The SIM cover can be removed by pressing it horizontally on the marked side
towards the status LED, and then pulling it out.
5. Check the installation environment for avoiding weak signal and other
problems (strong electromagnetic disturbances, high humidity).
6. Connect the antenna.
7. Do the wiring as shown in the wiring diagram.
8. Connect the device to the power supply (
12-30V AC/DC, min. 400mA
).
9. The device can be configured using SMS commands, as specified later in this
guide.
Under Voltage Lock Out (UVLO) function
The product is provided with built-in automatic power cut (Under Voltage
Lock Out) function. The device will turn off automatically when the
supply voltage drops under a critical level, and turns back on when the
voltage restores to operational level.
