15
6 Connection diagram
*The RX/TX port is not available in this version!
7 Installation guide
7.1 Mounting
Test the GSM signal with your mobile phone then after installation repeat the test
with the module! It may happen that the signal strength is not sufficient in the
desired mounting place. In this case the planned installation place can be changed
before mounting the device.
Do not mount the unit in places where it can be affected by strong electromagnetic
disturbances (e.g. in the vicinity of electric motors, etc.).
Do not mount the unit in wet places or places with high degree of humidity.
Connecting the GSM antenna: the GSM antennas can be fixed in the FME-M
connectors found on the panel. The antennas supplied with the module provide
good transmission under normal reception circumstances. In case of occasionally
occurring signal strength problems or/and wave interference (fading), use another
(directed) type of antenna or find a more suitable place for the module.
7.2 Putting into operation
Disable voicemail and notification in SMS about missed calls on the SIM cards
placed into the module.
If you enable PIN code request on the SIM cards, then enter the PIN codes in the
module settings as well.
Activate the mobile data traffic package for the SIM cards at the GSM service
provider.
