11
5.2 Configuring by SMS commands
The table below contains the commands to be sent in SMS to the module’s phone
number in order to configure the module. The module accepts SMS commands only from
the SUPERUSER phone number.
It is possible to send more commands in one SMS, but the message length should not
exceed 40 characters, otherwise the module responds with an error message. Each
command must end with
#
character.
There is possibility for settings query at some of the commands, these are marked
with
?
character
in the first table column. The module will send the requested settings in
SMS. For settings query send the command in SMS using question mark after the
command (e.g.
IP1A?#
).
Commands should always be typed using capital letters. The first step is to register the
SUPERUSER phone number using the programming software or by sending the
SUPERUSER#
command in SMS to any of the module’s phone numbers, from the
number wished to be registered.
Command
Value
Superuser registration
SUPERUSER
(registers the sender’s phone number)
#
?
Modifying / deleting the Superuser
SU =
phone number
#
?
APN assigned to SIM ”A”
APNA
=
APN name
(e.g.
internet
)
#
?
APN user name assigned to SIM ”A”
APNUA
=
user name
#
?
APN password assigned to SIM ”A”
APNPA
=
password
#
?
SIM ”A” PIN code
PINA
=
PIN code
#
?
APN assigned to SIM ”B”
APNB =
APN name
(e.g.
internet
)
#
?
APN user name assigned to SIM ”B”
APNUB =
user name
#
?
APN password assigned to SIM ”B”
APNPB =
password
#
?
SIM ”B” PIN code
PINB =
PIN code
#
?
Primary 1A comment
IPC1A
=
comment
#
?
Primary 1A IP address
IP1A
=
IP address (e.g.
111.222.33.44
)
#
?
Primary 1A port number
PORT1A
=
port
(e.g.
3535
)
#
?
Primary 1A user account ID
UID1A
=
user account ID (e.g.
1234
)
#
?
Primary 1A test sending frequency
FR1A
=
test frequency (in seconds) (e.g.
60
)
#
?
Primary 1A protocol
PROT1A
=
TELLMon_TCP
TELLMon_UDP
AMR-08
ENIGMA_II
#
?
Primary 2A comment
IPC2A =
comment
#
?
Primary 2A IP address
IP2A =
IP address (e.g.
111.222.33.44
)
#
?
Primary 2A port number
PORT2A =
port
(e.g.
3535
)
#
?
Primary 2A user account ID
UID2A =
user account ID (e.g.
1234
)
#
?
Primary 2A test sending frequency
FR2A =
test frequency (in seconds) (e.g.
60
)
#
?
Primary 2A protocol
PROT2A =
TELLMon_TCP
TELLMon_UDP
AMR-08
ENIGMA_II
#
