Telkom duoPlus 300WR, Manual

Page: 87 / 127

duoPlus 300WR User Manual
Page 87 of 127
QoS Shaper Configuration
The Shaper Configuration page is accessed by selecting Shaper on the Advanced
main page. Three shaper algorithms are supported:
ƒ
HTB
ƒ
Low Latency Queue Discipline
ƒ
PRIOWRR
QoS Shaper Configuration
Note: Egress TCA is required if shaper is configured for that interface.
Field Description
Interface The selections are WAN/LAN interfaces except WLAN, which does not support
Shaper feature. This field needs to be selected before shaper configuration.
Max Rate This field is applicable for the HTB Queue Discipline and Low Latency Queue
Discipline, both are rate-based shaping algorithms.
HTB Queue
Discipline
The hierarchical token bucket queue discipline is a rate-based shaping
algorithm. This algorithm rate shapes the traffic of a class over a specific
interface. All CoSx traffic uses a specific rate to which data will be shaped. For
example: If CoS1 is configured to 100Kbps then even if 300Kbps of CoS1 data is
being transmitted to the interface only 100Kbps will be sent out.
Low Latency This is similar to the above algorithm except that CoS1 is not rate limited. So in