Telkom duoPlus 300WR, Manual

Page: 18 / 127

duoPlus 300WR User Manual
Page 18 of 127
Setup the Device
When installing the router, find an area where there are enough electrical outlets for
the router, the main computer, and your other computer devices.
To setup the router:
1. Plug one end of the Ethernet cable to the router’s ETHERNET port and then
plug the other end to the Ethernet port in your computer.
2. If you have another device you need to connect through wire into the router,
use another Ethernet cable. Plug one end of the Ethernet cable to an
available Ethernet port in the router and then plug the other end to the
Ethernet port of the device.
3. Plug one end of the telephone cable to the Micro Filter (POTS Splitter’s)
ADSL port and then plug the other end to the Line port of the power supply
unit with integrated surge protection. Connect the PSU’s integrated line cord
to the router’s DSL port.
POTS Splitter/Microfilter
Your phone line carries with it both phone calls and Internet signals. When you
are using the Internet and performing a voice call at the same time, the
connection produces irritating high-pitched tones. Installing a Plain Old
Telephone Service (POTS) splitter/Microfilter separates the two signals and
eliminates the noise.
To setup the telephone POTS Splitter:
a. Locate the phone jack in your house.
b. Insert the POTS Splitter into the phone jack.
c. Plug one end of the telephone cable to the POTS Splitter’s TEL port and then
plug the other end to the telephone.
d. Do this on all of the Telephone outlets that you have telephones or other
telephone type equipment connected to.
4. Connect the power adapter to the router’s 9V DC port and then plug it to the
electrical outlet.