Telkom duoPlus 300WR, Manual

Page: 60 / 127

duoPlus 300WR User Manual
Page 60 of 127
Simple Network Timing Protocol
Simple network timing protocol (SNTP) is a protocol used to synchronize the system
time to the public SNTP servers. It uses the UDP protocol on port 123 to
communicate between clients and servers.
SNTP
To enable SNTP:
1. Check Enable SNTP .
2. Configure the following fields:
ƒ
Primary SNTP Server The IP address or the host name of the primary
SNTP server. This is set to igubu.saix.net by default.
ƒ
Secondary SNTP Server The IP address or the host name of the
secondary SNTP server. This is set to sangoma.saix.net by default.
ƒ
Tertiary SNTP Server The IP address or the host name of the tertiary
SNTP server. This is set to induna.saix.net by default.
ƒ
Timeout If the router failed to connect to an SNTP server within the
Timeout period, it retries the connection.
ƒ
Polling Interval The amount of time between a successful connection
with a SNTP server and a new attempt to connect to an SNTP server.
ƒ
Retry Count The number of times the router tries to connect to an
SNTP server before it tries to connect to the next server in line.