Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page
45 of 49
When the USB UART port is connected to the PC the system will detect 4 Serial Ports.
Please select the xE910 Development Kit USB drivers when required.
The ports will be recognized as “xE910 Dev Board USB <--> Serial”
Then after the driver installation the system will list 4 new Serial Ports:
USB Serial Port (COM1)
USB Serial Port (COM2)
USB Serial Port (COM3)
USB Serial Port (COM4)
The first serial port is related to the module’s USIF1 (RX/TX AUX)
The second serial port is related to the module’s SPI
The third serial port is related to the module’s USIF0 (Main Module’s Serial Port)
The fourth is Reserved
Summary of Contents for xE910
Page 1: ......
